JL
JLink Technology 傑聯特科技
RFQ
OB39R32T1 In Stock

OB39R32T1 Capacitive Touch-Key MCU

The OB39R32T1 is an 8-bit Flash MCU from On-Bright with built-in capacitive touch sensing, using a 1T (single-clock-cycle) 8051-compatible core and offering 6~8 touch channels depending on package. With a wide 2.2~5.5V supply and good noise immunity, it is widely used for touch panels and keys in appliances and consumer products.

Type
8-bit Touch-Key MCU
Core
1T 8051-compatible
Touch Channels
6 ~ 8 (by package)
Clock
22 MHz internal RC

Features

  • 8-bit 1T (8051-compatible) Flash MCU + cap touch
  • 6~8 touch-sense channels (by package)
  • On-chip 22 MHz high-speed RC
  • Wide 2.2~5.5V supply
  • ISP / ICP in-system programming
  • SOP / SSOP / LQFP packages (20/24/28/32 pin)

Specifications

Type 8-bit Touch-Key MCU
Core 1T 8051-compatible
Touch Channels 6 ~ 8 (by package)
Clock 22 MHz internal RC
Supply Voltage 2.2V ~ 5.5V
Package SOP / SSOP / LQFP (20~32 pin)

Applications

Touch MCUCapacitive Touch8-bitHMIAppliance
OB39R32T1 ON-BRIGHT SOP / SSOP / LQFP (20~32 pin)

Order Info

Stock, pricing, lead time, and samples for OB39R32T1 — we reply within one business day.

Request Quote Request datasheet / sample
On-Bright logo

On-Bright

China

Power Management & LED Lighting Driver ICs

View all On-Bright products → Official On-Bright site

OB39R32T1 — Frequently Asked Questions

Where can I buy OB39R32T1?
JLink Technology is an authorized On-Bright distributor serving Taiwan, Mainland China, and Hong Kong. Submit an RFQ for OB39R32T1 and we will respond with pricing and lead time within one business day.
Is OB39R32T1 in stock?
Stock and lead time for OB39R32T1 vary by quantity. Send us your required quantity via the RFQ form and we will confirm current availability and delivery schedule.
Can I get the OB39R32T1 datasheet and samples?
Yes. As an authorized On-Bright distributor, JLink Technology can provide the official OB39R32T1 datasheet, samples, and engineering support. Contact us to request them.
What is the minimum order quantity for OB39R32T1?
We support orders from prototype samples to mass production. Tell us your target volume in the RFQ and we will quote accordingly.
Is there a pin-compatible alternative or second source for OB39R32T1?
Tell us the part you need to replace and your application. As a multi-line authorized distributor, JLink Technology can suggest a verified cross-reference or second source related to OB39R32T1 where one exists, and quote pricing, stock, and lead time.

Related Products

OB5269 In Stock

OB5269 Green-Mode Current-Mode PWM Flyback Controller

The OB5269 is a green-mode current-mode PWM flyback controller from On-Bright, integrating an HV startup circuit and extended burst mode that reduces frequency at light load for higher efficiency and energy-standard compliance. With built-in OCP/OLP/UVLO/OTP/OVP protections in an SOP-8 package, it suits phone chargers, adapters, and low-power AC/DC supplies.

PWM ControllerFlybackAC/DC
OB3375 In Stock

OB3375 Quasi-Resonant Buck LED Driver Controller

The OB3375 is a high-efficiency buck LED driver controller from On-Bright using quasi-resonant, peak-current-mode control for white-LED and LCD-backlight strings. A built-in transconductance amplifier gives accurate constant-current (CC) regulation, with HPWM current setting and LPWM low-frequency dimming (1%~100%), plus full protection (LED open/short, CS open, MOS/diode/inductor short, OTP, UVLO). SOP8.

LED DriverBuckQuasi-Resonant
OB3392 In Stock

OB3392 Offline Single-Stage PSR Constant-Current LED Driver

The OB3392 is an offline (AC-DC) isolated single-stage primary-side-regulated (PSR) constant-current LED lighting driver controller from On-Bright, with primary-side current regulation that needs no opto-coupler or TL431. It uses constant on-time for high power factor and quasi-resonant operation for efficiency, with line/load compensation and LED open/short, cycle-by-cycle current limit, VDD UVLO/OVP, and over-temperature protection. For LED bulbs and tubes. SOT23-6.

LED DriverConstant CurrentPSR